Custom Gateway - Customer Support


Welcome to the Custom Gateway Support Portal

Here you can raise support tickets and read articles on common queries using the topic sections and search below

Artwork format for bulk upload to create PERSONALISE-iT Templates

Follow

Detailed below is the specification for a PSD file that can be bulk uploaded to the Gateway CPP to create PERSONALISE-iT templates

Using this method it is possible to create 1000's of templates per day - short cutting the manual design process which we estimate takes about 15 minutes per card 

The PSD should be in the following format

  • 2 x Text layers, text fills bounding box, the text is used for measurements rather than the bounding box, so the example text should fill the desired area edge to edge.
  • 2 x 'Mask' layers, raster, rather than vector, rectangular areas marking the outer edges of any image areas. Colour unimportant. Used for mask placement coordinates.
  • 1 x Artwork layer, any image areas knocked out leaving transparency. Used for creating any new shape masks.
  • 300dpi / sRGB

An example PSD is attached for reference

A more detaled artwork specification is available at 
https://docs.google.com/document/d/1LclRIN3VtDcLqihStAk1RVNNTFwFtRoRNOy3wB0emv4/edit?usp=sharing

Was this article helpful?
0 out of 0 found this helpful

Comments